Under normal circumstances, bright colors are important when choosing a reflective vest. Just like the raincoat worn by high-speed traffic police nowadays, it is better because they are all fluorescent fabrics. This fabric is generally based on Oxford raincoat, PU coating rainwear, waterproof and breathable. Not only the clothes themselves are brightly colored and have a good warning effect, but the reflective strips are also very powerful. In addition to reflective raincoats, reflective vests are more commonly used, as stated in the national standard GB20653: This standard is a mandatory standard. 

Applicable to various positions that need to improve the visibility of operators to ensure personal safety, such as transportation, railways, public security, industrial and mining, fire protection, environmental sanitation, construction, ports, docks, airports, gardens, roads, rescue, petroleum and petrochemical industries .

Wearing a cycling reflective vest, the fluorescent warning effect is excellent whether it is during the day or at night! Because of the standard reflective vest, fluorescent during the day and reflective at night, very eye-catching.

The following is a summary of the purchase points of reflective vests (other reflective clothing, such as reflective raincoats are only partially applicable, because of the big difference in fabrics, they pay attention to waterproofing and attach importance to sealant, which will be discussed later):

1. The fabric should not be too thin. The mesh cloth should be more than 100 grams, and the plain cloth (called warp knitted fabric in the industry) should be at least 110 grams. This refers to the square gram weight. The gram weight is too low. difference. If it looks very transparent, it is only 60g to 80g.

2. Reflective strips should be protected from 360 degrees, that is, at least one of the reflective strips is a full circle around the torso. In case of disconnection, it should not exceed 5cm.

3. Easy to put on and take off. The placket is usually made of buckles, followed by zippers. Their shoulders and waists are connected with buckles for easy removal and escape. It can be used at times. For example, if you are caught by something, just break free.

4. The quality of the reflective strips should be at least high-bright, type 1 and type 2 are acceptable, if domestic and international standards are required, they must be at least type 2, also called second level, the industry is the reflectance, or retroreflective coefficient 330 or more.

5. If the reflective strip is not fabric material, it is made of PVC material. It looks like plastic. For winter use, it must be resistant to cold, otherwise it is easy to break. This kind of reflective strip technology is generally imported and relatively mature, unlike fabric Made in China (nylon bottom, TC bottom, cotton) is very mature.